How the doses are calculated
Every amount comes from chemistry: the active ingredient needed for the change, divided by the strength on your label. The web calculator and the iPhone app run the same engine against the same 36 checked test cases.
Chlorine, stabilizer, calcium, salt
- Active ingredient (g) = change (ppm) × water (L) ÷ 1,000; product = active ÷ label strength.
- Liquid chlorine strength is available chlorine in grams per 100 mL.
- Calcium hardness and alkalinity are expressed as calcium carbonate, so calcium chloride and baking soda are converted with their molar masses (CaCl₂ 110.98, NaHCO₃ 84.01, CaCO₃ 100.09 g/mol).
- Side effects: each 1 ppm of chlorine from trichlor adds 0.61 ppm CYA, from dichlor 0.91 ppm CYA and from cal-hypo 0.71 ppm calcium hardness.
pH
Acid and soda ash amounts use a carbonate equilibrium model. Your pH, alkalinity, CYA (cyanurate also buffers) and temperature give the dissolved carbonate; we then solve for the acid or soda ash that reaches pH 7.5. Constants: Plummer & Busenberg (1982) for carbonic acid, cyanuric acid pKa 6.88, Davies activity correction.
We check these amounts against the U.S. Geological Survey’s PHREEQC model with two independent thermodynamic databases; all agree within 5 %. Rule-of-thumb charts often give more acid than this. If you use borates, you will need more acid than shown.
Targets
| Reading | Range | Aim |
|---|---|---|
| Free chlorine | ≥ 1 ppm pools, ≥ 3 ppm spas (CDC), and ≥ 5 % of CYA | about 7.5 % of CYA |
| pH | 7.2–7.8 (CDC) | 7.5 |
| Total alkalinity | 60–120 ppm | 80 |
| Calcium hardness | 250–450 plaster; 150–400 vinyl, fiberglass, spas | 300 / 200 |
| CYA | 30–50; 60–80 with a salt generator; 20–40 spas | 40 / 70 / 30 |
Combined chlorine above 0.5 ppm adds about 10 × CC to the chlorine dose.
Order
Alkalinity, pH, calcium, stabilizer, chlorine (last, away from acid), salt. Each later amount uses the water as it will be after the earlier additions.
Limits
No dose is shown when a reading, volume or strength is outside a plausible range. Bromine and biguanide systems are not supported. These are estimates: retest after each addition, follow product labels and never mix chemicals.